How Does the Guardian Cone Pro Support Pedestrian Safety in Work Zones?

Road construction and maintenance often bring vehicles, workers, and pedestrians into close quarters. Sidewalks may be closed, crossings may be temporarily relocated, and pedestrians may need to pass just a few feet from active construction or moving traffic.

If a driver approaches too fast or misses a warning sign, everyone nearby could be at risk.

The Guardian Cone Pro from Site 20/20 monitors approaching traffic and sends real-time alerts to workers through wearable devices. By alerting workers to potential traffic hazards, the system helps crews take steps to improve safety for both workers and nearby pedestrians. 

Why do pedestrians face extra risks around work zones?

Walking near roadwork can be challenging, especially when people must navigate unfamiliar routes or pass close to moving vehicles.

Here are some common risks pedestrians may face:

  • Reduced visibility: Construction equipment and parked vehicles can block sightlines, making it harder for drivers and pedestrians to see each other.
  • Distracted drivers: Drivers focused on lane changes, construction signs, and equipment may overlook someone walking nearby.
  • Speeding vehicles: Drivers approaching too fast may have less time to react or stop. 
  • Preoccupied workers: Workers busy with their tasks may not notice an approaching vehicle or someone walking close to the work area.
  • Displaced cones and barriers: When traffic control equipment gets knocked out of position, pedestrians may find it difficult to tell where they should walk.

How do Guardian cones help crews protect pedestrians?

Giving crews early warning of approaching vehicles

The Guardian Cone Pro uses radar technology to monitor approaching vehicles and their speeds, providing alerts to equipped workers within a 500-foot range.

When pedestrians are near moving traffic, even a few extra seconds of warning can help workers respond to potential hazards and make decisions that keep everyone safe.

For example, an alert about an approaching vehicle may help a worker managing a temporary crossing decide to hold pedestrians back until the vehicle has passed.

Supporting safer work zone setup near pedestrian areas

Before roadwork begins, crews need to position cones, signs, and barriers to guide pedestrians safely around the work zone. This can be challenging when vehicles are passing nearby, especially around sidewalks and pedestrian crossings.

The Guardian Cone Pro is lightweight and quick to deploy, allowing crews to monitor approaching traffic as they set up temporary pedestrian routes and other traffic control measures.

Keeping track of Guardian cone locations

On larger construction sites, crews may be working in several locations, and traffic control equipment may need to be repositioned as work progresses.

The Guardian Cone Pro features GPS tracking, allowing supervisors to check device locations remotely. This makes it easier to keep track of where the smart cones are positioned and coordinate their placement as work moves from one area to another.

For projects near pedestrian areas, this visibility helps teams track Guardian Cone Pro devices and ensure they’re placed correctly for temporary pedestrian routes and safety.

Using traffic data to plan work near pedestrian routes

Traffic volumes and speeds can vary throughout the day. Understanding these patterns can help crews plan activities near pedestrian routes.

The Guardian Cone Pro records average vehicle speeds and vehicle counts, which project managers can access through Site 20/20’s Partner Portal. 

This data can help teams answer questions such as:

  • When is traffic busiest? Vehicle counts can identify busier periods to consider when scheduling work near sidewalks.
  • How fast are vehicles traveling? Average speed data gives managers a clearer picture of traffic conditions around the work zone. 
  • What should crews consider when planning pedestrian routes? Speed and volume data can help crews assess temporary walking routes and make more informed safety decisions.

What other measures are needed to protect pedestrians?

Traffic monitoring is one part of work zone safety. Pedestrians also need clear, accessible routes around construction areas. Key measures include:

  • Clearly marked pedestrian routes: Make it easy for people to know where they should walk when sidewalks are closed.
  • Physical barriers: Keep pedestrians separated from moving vehicles and active construction areas where required.
  • Visible warning signs: Let drivers and pedestrians know about temporary closures and changes to walking routes.
  • Accessible pathways: Accommodate people using wheelchairs, mobility aids, and strollers, as well as people who are blind or have low vision.
  • Adequate lighting: Keep walking routes visible during night work and in poorly lit areas.
  • Regular inspections: Check that signs, barriers, and temporary routes remain properly positioned and usable as work progresses.

Crews should follow applicable traffic control standards and accessibility requirements when planning pedestrian access around work zones.

Improve work zone traffic awareness with Site 20/20

Pedestrian safety is an important part of managing any work zone, especially when construction occurs near busy sidewalks and crossings. Having the right equipment and traffic control measures in place can help crews manage these areas with greater confidence.

Site 20/20’s Guardian Cone Pro can complement existing traffic control measures by providing valuable traffic data and alerts to support safer, more organized roadside operations.

Want to see how it could support your next project? Book a demo with Site 20/20 to explore its features and applications.

Frequently asked questions

Do Guardian cones detect pedestrians?

No. The Guardian Cone Pro detects approaching vehicles, not pedestrians. It alerts equipped workers to approaching traffic so they can take appropriate precautions.

What role do smart traffic cones play in pedestrian safety?

As part of a smart traffic control system, these cones can help workers monitor approaching vehicles and stay aware of potential hazards in work zones near pedestrian routes.

How does the Guardian Cone Pro detect approaching vehicles?

The Guardian Cone Pro uses radar technology to monitor approaching traffic and vehicle speeds, providing real-time warnings to equipped workers about potential hazards.

What is the alert range of the Guardian Cone Pro?

The Guardian Cone Pro has a specified range of up to 500 feet. Actual warning time depends on vehicle speed and site conditions.

Can Guardian cones replace traditional pedestrian safety measures?

No. Guardian cones complement existing safety measures but do not replace physical barriers, designated pedestrian routes, warning signs, or established traffic control procedures.

Share the Post:

Related Posts